Common stainless steel plates are divided into two categories:
1. Cold-rolled stainless steel plate split plate and coil plate open flat plate.
A, stainless steel coil plate is divided into 1 meter, 1.219 meter board surface, 1.5 meter board surface.
B, stainless steel plate commonly used scale is 1 m * 2 m, 1.219 m * 2.438 m

2, hot-rolled stainless steel plate is divided into coiled plate, open flat plate and hot-rolled flat plate
A, stainless steel coil plate commonly used board surface is 1.5 meters, 1.25 meters
B, stainless steel plate plate commonly used scale 1.5 * 6 meters, 1.8 * 6 meters, 1.25 * 6 meters.
The proportion of common stainless steel plates
Theoretical calculation formula for stainless steel plates:
Theoretical component (kg) = length (meter) * width (meter) * thickness (mm) * specific gravity (density)
Example of board price conversion:
A practical thickness of a standard stainless steel plate with a thickness of 2 mm is 1.8 mm, and the theoretical weight of a 2 ton stainless steel plate is 1.8 tons. If the adjustment price is 11,400 yuan / ton, then the price of the pound is probably (2 / 1.80) * 11400 = 12650 yuan / ton, (quantity negative public service (1.80-2) / 2 * 100% = 10%, 11400 / ( 1-9%) = 12650 yuan / ton) In general, the price is overweight and the price is high; the price is adjusted, it is heavier than the pound, and the price is lower than the price. (General merchants will use this method to settle, because the average stainless steel plate will have a 5% difference, and some will even reach 30%, so the price of the pound is generally high).
Commonly used cold rolled stainless steel plate scale
 
1 (57).jpg
 

Leave a Comment(And our MOQ is 1ton)