ASTM A335 P92 High pressure boiler pipes
ASTM A335 P92 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
ASTM A335 P92 high pressure semaless boiler pipe, The range of ASTM A335 P92 seamless alloy steel pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
Each length of pipe shall be subjected to the hydrostatic test. Also,
each pipe shall be examined by a non-destructive examination method in
accordance to the required practices.
The range of ASTM A335 P92 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Outer Dimensions: 19.05mm – 114.3mm
Wall Thickness: 2.0mm – 14 mm
Length: max 16000mm
Steel grade: ASTM A335 P92
Bare packing/bundle packing/crate packing/wooden
protection at the both sides of tubes and suitably protected for
sea-worthly delivery or as requested.
Inspection and Test:
Chemical Composition Inspection,
Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation,
Flaring, Flattening, Bending, Hardness, Impact Test), Surface and
Dimension Test,No-destructive Test, Hydrostatic Test.
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Chemical Requirements of ASTM A335 P92
Mechanical Properties of ASTM A335 P92
|Tensile strength, min, (MPa)||620|
|Yield strength, min, (MPa)||440|
|Elongation, min, (%), L/T||20/…|
Material & Manufacture
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.
A / N+T
N+T / Q+T
Mechanical Tests Specified
Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.
Notes for Bend Test:
For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.
Miele Steel Co., Ltd., founded in 1998, is a professional manufacturer and global exporter specializing in metal manufacture and exportation. In recent years, winged by rapid merge and expansion, Our well-equipped plant emerged in Dainan, Jiangsu Province , with two Export offices respectively located in Shanghai and HongKong catering to a lager scale of customers from both home and abroad under the banner of supreme service.
Our plant now covers a land area of 18000 square meters, with 160 employees and 19 technicians. Backed up by our loyalty customers, old and new, as well as our advanced R&D team, the ranges of our stainless steel products are expanded to more varied choices, such as stainless steel wire, rod, round bar, flat bar, angle bar, channel bar, pipe, plate, sheet and coil made according to the norm and specification in GB, ASTM, JIS, EN, TOCT, KSD, and IS.
Our annual production capacity is now over 15000 T, most of which are widely used in petrochemical, textile, ship-making, construction industry and precision instrument manufacture. Our products are certified by ISO9001:2000 authentication quality systems and we are nominated as the AAA enterprise by Jiangsu government.
We promise "complete specifications, prompt delivery, high quality, competitive price, ". The unwavering supports you provide, along with the increasing requirements you put contributes to more varied high-quality products with more competitive prices we offer. Win-win situations are always our same pursuit.
If you are interested in our products, please feel free to contact us. We warmly welcome friends and cooperators from all over the world!
Marketing and Sales Center:
Room 501,Building33,No.258,Xinzhuan Road,SongJiang District,Shanghai,China
Email: [email protected]
standard export packing, sea worthy packing.Delivery Detail:
base on quantity, normally 15 days after order is confirmed